Estimate your metal roof cost in seconds. This free metal roof cost calculator gives you an instant price by metal type — standing seam, corrugated, metal shingle, aluminum or copper — plus roof size and pitch, then compare free quotes from licensed local roofers.
*Typical U.S. installed pricing. Premium copper runs higher. Enter your roof details for an estimate matched to your home.
★★★★★ Trusted by 9,000+ U.S. homeowners planning metal roofs
Enter your roof footprint and metal type for an instant price range.
Metal roofing quotes vary widely by type and installer. Our calculator draws on real installation data from across the U.S. so you walk into every conversation informed — and our free quote tool puts vetted local metal roofers in competition for your job.
Estimates built from thousands of real roof installs — by material, roof size, pitch and your local labor rates.
Compare licensed, insured roofing pros side by side. No pressure, no hidden fees.
See how metal shingle, corrugated, standing seam, aluminum and copper stack up on price and lifespan.
Get a realistic roof cost estimate in three simple steps — no email or sign-up required. Enter a few details about your roof and see a full price breakdown instantly.
Add the length and width of your building footprint in feet. We estimate the true roof area automatically using your roof pitch — no ladder required.
Select your roofing material — asphalt, architectural, metal, tile or flat — then set the roof pitch, tear-off and access. Each option adjusts your estimate the way a contractor's quote would.
Instantly see your total price range, cost per square foot and a line-by-line breakdown of materials, labor and tear-off — then request free quotes to confirm.
Each estimate begins with up-to-date installed pricing for your chosen material, then applies the cost drivers that most influence the final figure — roof pitch, tear-off, and access or number of stories. Results are shown as a range because no two roofs are alike: the lower figure reflects a simple, single-story roof in a lower-cost region, while the higher figure reflects a steep, multi-story roof with premium materials and a full tear-off.
Most projects fall near the middle, which we display as your estimated total. For a firm price, we recommend confirming with a licensed local roofer who can inspect your roof deck and existing shingles in person.
Typical installed price per square foot (materials + labor) for a residential metal roof in the U.S. Your final cost depends on metal type, roof size, pitch, tear-off, access and local labor rates.
| Metal Type | Installed $/sq ft | Lifespan | Best For |
|---|---|---|---|
| Metal shingle | $5 – $9 | 40–50 yrs | Budget metal, shingle-style look |
| Corrugated / ribbed panel | $7 – $12 | 25–40 yrs | Barns, sheds & value projects |
| Standing seam (steel) | $10 – $17 | 40–70 yrs | Homes — sleek, hidden fasteners |
| Aluminum standing seam | $11 – $17 | 50+ yrs | Coastal & humid climates |
| Copper / zinc | $20 – $40 | 70–100 yrs | Premium, architectural roofs |
Ballpark total installed cost by roof area, based on a mid-range standing seam steel roof with tear-off. Metal shingle and corrugated run lower; copper runs much higher. Use the calculator above for a figure matched to your exact metal type.
| Roof Size | Typical Example | Low | Average | High |
|---|---|---|---|---|
| 100 sq ft | Small porch / bay | $600 | $900 | $1,500 |
| 300 sq ft | Garage / carport | $1,800 | $2,700 | $4,500 |
| 500 sq ft | Extension / addition | $3,000 | $4,500 | $7,500 |
| 1,000 sq ft | Small home / duplex | $6,000 | $9,000 | $15,000 |
| 1,500 sq ft | Average single-family home | $9,000 | $13,500 | $22,500 |
| 2,000 sq ft | Large home / small commercial | $12,000 | $18,000 | $30,000 |
The metal type you choose is the single biggest factor in your metal roof cost and how long it lasts. Here's how the most common U.S. metal roofing systems compare.
Metal shingles and tiles stamp steel or aluminum into the look of shingles, slate or clay while keeping metal's long life. They're the most affordable way into a metal roof and install over most existing structures.
They don't have the sleek, continuous lines of standing seam, but they cost far less and still outlast asphalt shingles by decades.
Corrugated and exposed-fastener ribbed panels are the classic, economical metal roof — fast to install and long favored on barns, workshops and agricultural buildings, and increasingly on budget-conscious homes.
The exposed screws need re-tightening or replacing over time, which is the main trade-off against pricier concealed-fastener systems.
Standing seam is the premium residential metal roof: raised interlocking seams with concealed fasteners give a clean, modern look and an exceptionally watertight, low-maintenance surface.
It costs more than exposed-fastener panels, but the sleeker appearance, longer life and better weather performance make it the go-to choice for homes.
Aluminum won't rust, which makes it the standing-seam metal of choice near the coast or in humid, salt-air environments where steel can corrode over time.
It carries a small premium over steel and is lighter, though it can be slightly more prone to denting from large hail.
Copper and zinc are the luxury end of metal roofing — beautiful, extraordinarily durable, and often lasting a century as they develop a natural patina. You'll see them on historic, high-end and architectural homes.
The material cost is several times that of steel, so these are reserved for statement roofs or smaller accent areas like bays and porches.
The best membrane depends on your climate, budget, roof traffic and how long you plan to stay. Get matched with vetted local pros who can inspect your roof and recommend the right system.
Two roofs of the same size can differ by thousands of dollars. These are the factors our calculator accounts for — and the ones your contractor will price.
| Cost factor | How it affects your quote | Price impact |
|---|---|---|
| Material choice | Premium materials like metal and tile cost far more per square foot than asphalt shingles — but last decades longer. | High |
| Roof size & shape | Bigger roofs cost more in total but less per square foot. Odd shapes and many penetrations add labor hours. | High |
| Tear-off & disposal | Removing and hauling away the old roof adds roughly $1–$2 / sq ft. Overlays are cheaper, but not always allowed by code. | Medium |
| Roof pitch & complexity | Steep roofs and complex shapes — dormers, valleys, hips and multiple penetrations — take more material and labor hours. | Medium |
| Underlayment & flashing | New underlayment, drip edge, and valley or chimney flashing add cost but are what actually keep the roof watertight. | Low |
| Access & height | Multi-story roofs, poor access and scaffolding or safety requirements all increase labor charges. | Medium |
| Your location | Local labor rates, permit fees and building codes vary by city and state, moving the total up or down. | Medium |
| Deck repairs | Rotted decking or structural fixes discovered during tear-off are billed on top of the base price. | Varies |
Caught early, some roof issues are cheap repairs. Left too long, they mean a full replacement. Watch for these warning signs.
Water stains on ceilings or walls after rain mean moisture is already getting past the roof.
Shingles that are curling, buckling, cracked or missing leave the roof deck exposed to the weather.
Bare patches and granules collecting in your gutters mean the shingles are near the end of their life.
Light coming through the roof boards, or damp insulation, points to gaps and active leaks overhead.
A drooping or uneven roofline signals a weakened or water-damaged deck that needs prompt attention.
Most roofs last 20–30 years. If yours is near the end of its life, replacing usually beats repeated repairs.
Tell us about your roofing project and we'll match you with up to 3 licensed local roofers. Compare prices and pick the best deal — the choice is 100% yours.
★★★★★ Rated 4.8/5 by 9,000+ homeowners
Metal roofs run about $5 to $17 per square foot installed for steel and aluminum systems, or roughly $12,000–$30,000 for an average home. Metal shingle and corrugated are cheapest; premium copper or zinc can reach $20–$40 per square foot.
For most homeowners staying long-term, yes. A metal roof lasts 40–70 years — two to three times a shingle roof — resists wind, snow and fire, and reflective finishes lower cooling bills, so lifetime cost often works out lower despite the higher upfront price.
Metal shingles ($5–$9 per sq ft) and corrugated / exposed-fastener panels ($7–$12) are the most affordable metal roofs. Standing seam costs more for its concealed fasteners and sleeker look.
Standing seam has raised, interlocking seams with hidden fasteners for a clean, watertight, low-maintenance roof. Corrugated uses exposed screws — cheaper to install, but the fasteners need re-tightening or replacing over time.
Steel and aluminum roofs last 40–70 years, while copper and zinc can last 70–100 years. Good installation and occasional maintenance help any metal roof reach the top of its range.
Often yes — many codes allow one metal layer over existing shingles if the structure is sound, which saves on tear-off. A tear-off is still recommended when the deck needs inspection or repair.
Reflective and 'cool roof' metal coatings can cut summer cooling costs noticeably, and many insurers offer discounts for metal's impact and fire resistance. Savings vary by climate and carrier.
It gives a data-based estimate using up-to-date pricing by metal type, roof size and pitch — ideal for budgeting. For an exact price, get free quotes from licensed local metal roofers who can inspect your roof.
Wherever your home is, our free tool connects you with licensed, insured roofing contractors near you. We match homeowners with vetted local pros in every major U.S. metro.